Sony SupportXAV-712BT

Firmware update 1.20 for XAV-602BT/612BT/712BT/742

    Applicable Models
    About this download
    Preparation
    File Info
    System Requirements
    Install

    Applicable Models

    This information is for the following models:
    • XAV-712BT
    • XAV-612BT
    • XAV-742
    • XAV-602BT

    About this download

    Applicable firmware
    Version: 1.11 or earlier

    • For the operation to check the installed firmware version of the AV Center.
    • If the version is displayed as “1.12”, you do not need to update the firmware except Australia region.
    • This time firmware version is 1.20. The difference between 1.12 and 1.20 is only upgrading of TomTom navigation feature for Australia region. The version 1.12 already has following 2 improved functions. So you don’t need to update from version 1.12 to 1.20 except Australia region.
    • XAV-742 doesn’t have following 2 issues. But the update binary is common. So please replace from current firmware to this firmware.

    Benefits and Improvements

    Note: The following issues are not occurred on XAV-742.

    • Fix the problem of “Phone call is terminated when turning off the engine”. (XAV-602BT, XAV-612BT, XAV-712BT and XAV-712HD)
    • Recover GPS signal reception when it stops while using TomTom navigation. (XAV-712BT and XAV-712HD. XAV-602BT doesn’t have the issue.)

    Preparation

    • Please make sure the PC is connected to internet.
    • This firmware update is performed with a USB storage device to be inserted into your Car Audio unit. Make sure to use USB storage media with available space of 200 MB or more.
    • You need to turn off and on the unit after the firmware update. The touch panel may not work if you skip this step.
    • WARNING! Do not turn off the unit during the update process. Doing so may damage your unit and make it unusable, or may require service.

    File Info

    File Name

    • SONYXAV_CB21.zip

    File Version

    • 1.20

    File Size

    • 186.0MB

    Release Date

    • 2014-06-20

    System Requirements

    • System OS

    Install

    Details

    Download the Update File

    1. Download the update file from the to your PC.
    2. Extract the update file to create the "update" folder which includes SONYXAV.BIN.
    3. Copy the "update" folder to the root directory of the USB memory.

    Updating Procedure
    This update procedure in your Car Audio will take approximately five minutes.

    Preparation: Park your car on the safe place and start the engine to avoid the voltage drop of the power line.

    1. Connect the USB storage media which includes the update folder to the unit.
      Any USB memory other than the one for update should not be connected.
    2. Press OFF button of the remote commander (or press and hold SOURCE button for 1 second ) so that the unit is in Source OFF state.
    3. Select Setting from Home Menu.
    4. Select General Settings → Firmware Version.
       
    5. Press Update button.
       
    6. Check if the current firmware is subject to update.

      The firmware version 1.11 or earlier is subject to update.
    7. Press Update button again to start the firmware update.
      Important: Please wait until “Firmware Update Success!!” message appears on the screen without turning off the unit or removing the USB memory.
    8. Press and hold OFF button of the remote commander (or press and hold SOURCE button for 2 seconds) to turn off the unit.
    9. Remove the USB storage media and wait for more than 10 seconds.
      Note: Make sure to wait for more than 10 seconds so that the unit is surely turned off.
    10. Press SOURCE button to turn on the unit again.

    Confirm the update version

    1. Select Setting from Home Menu.
    2. Select General Settings → Firmware Version.
       
    3. Confirm 1.20 is displayed

    Additional update procedure for Australia region

    • You need to update not only firmware but also map data files.
    • Please refer a leaflet which is included into XA-NV300T to download and update the map data.